Question 1

Do you make it in 1/8 thick or 3/16 View answer

Asked 3 ´years ago | Woodfold 36" (914mm)Slat Length x 24" (610mm) Solid Wood Flat Tambour w/Radius Edges - EACH (Maple)

Question 2

Does the Dummy package come with two levers or one lever? View answer

Asked 3 ´years ago | Brinks Anna Push-Pull-Rotate Door Leverset (Dummy - Tuscan Bronze)

Question 3

Is each arm 10” or total open length is 10”? View answer

Asked 3 ´years ago | Knape & Vogt 10" (254mm) Steel Support Hinge - PAIR

Question 4

is this adhesive? is it grey in color? View answer

Asked 3 ´years ago | Pemko Closed Cell EPDM Sponge Neoprene Weatherstripping Tape 1/4in.H x 1/2in.W x 10ft.L - EACH (Gray)

Question 5

What font are the Emtek 7" (178mm) Modern House Numbers - View answer

Asked 3 ´years ago | Emtek 7" (178mm) Modern House Numbers - (Oil Rubbed Bronze)

Question 6

Does this fit holes with 5 1/16 center? View answer

Asked 3 ´years ago | Belwith-Keeler Sandrine 3-3/4" (96mm) Center-to-Center & 5-1/16" (129mm) Center-to-Center Cabinet Pull (Champagne Bronze)

Question 7

Do these rails lock? View answer

Asked 3 ´years ago | Knape and Vogt 14" (356mm) 75lbs. (34.019kg) Adjustable Keyboard Slides with Shelf Tabs - PAIR

Question 8

does Lemans 11 KS-LM60 come in a left hand unit. (blind side on the right. View answer

Asked 3 ´years ago | Kessebohmer LeMans II 60 - 21in. Corner Pullout 2-Shelf Set - Right Hand Swing

Question 9

compatible base plate for this hinge View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Grass 120° Tiomos 9.5 Crank Hinge - EACH (Half Overlay, Self-Closing, Dowelled)

Question 10

does the 5/8" offset cabinet hinge come in white. View answer

Asked 3 ´years ago | 5/8in. Offset Face Frame Mount Non-Self Closing Cabinet Hinge - PAIR (Polished Chrome)

Question 11

What is the diameter of the holes? Need to hang vintage swing arm rods. View answer

Asked 3 ´years ago | US Futaba Double Angle Bracket - EACH (Zinc)

Question 12

Do they make a 3/4" inset? View answer

Asked 3 ´years ago | THH 3/8" Inset Knife/Pivot Hinge - PAIR (Antique Brass)

Question 13

Is the pin on this hinge removable? View answer

Asked 3 ´years ago | SGS Commercial Duty 4" x 4" Ball-Bearing Hinge - Square Corner - EACH (Satin Nickel)

Question 14

I want to have all the door knobs with the same key. How do I rekey the doorknobs to one key? View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Brinks Stafford Push-Pull-Rotate Door Knobset (Keyed Entry - Satin Nickel)

Question 15

Any install instructions? View answer

Asked 3 ´years ago | Gatco Latitude II Paper Towel Holder (Matte Black)

Question 16

Can you cut them to 48" prior to shipping? View answer

Asked 3 ´years ago | Knape and Vogt 72" (1829mm) Plastic Track Set - For 3/4" Thick Bypassing Doors - (Tan)

Question 17

8 Olympus cam lock disk tumbler, all 8 locks keyed different with master key option, is master key included? View answer

Asked 3 ´years ago | Olympus Cascade 1-3/4" Disc Tumbler Cam Lock - Keyed Different/Master Keyed (Nickel)

Question 18

Can you cut to size? View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - KV 72" (1829mm) Roll-Ezy Aluminum Track Set - For 1/4" Thick Small to Med. Glass Sliding Doors

Question 19

Weight capacity View answer

Asked 3 ´years ago | Sugatsune Heavy-Duty Bar or Countertop Lift Assist Damper - EACH (White/Nickel)

Question 20

in full flush overlay construction would the false drawer front clear a door below ? View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Knape and Vogt Sink-Front Tip-Out Tray Scissor Hinges - PAIR (Zinc)

Question 21

Ball Tee Fitting for 1-1/2" Diameter Tubing (Satin Stainless Steel) View answer

Asked 3 ´years ago | Ball Tee Fitting for 1-1/2" Diameter Tubing (Satin Stainless Steel)

Question 22

1. Will this work with a breadboard slide above it? 2. How much free space below it, in retracted position? View answer

Asked 3 ´years ago | Rev-A-Shelf Heavy Duty Appliance Lift w/Soft-Close - (Silver)

Question 23

Will these hinges fit a cabinet door with a beveled edge View answer

Asked 3 ´years ago | B & M Hardware 3/8in. Offset Non-Self Closing Cabinet Hinge - EACH (Unlacquered Polished Brass)

Question 24

Does this hinge come in black? View answer

Asked 3 ´years ago | THH 3/8" Inset Knife/Pivot Hinge - PAIR (Antique Brass)

Question 25

how many screws are included? View answers

Asked 3 ´years ago | Don-Jo Aluminum Door Flush Bolts - 1/8in. Offset (Silver Coated)

Question 26

I would like to hang 4 doors over a 12 foot span. What additional hardware matches this system? View answer

Asked 3 ´years ago | NGP 144" (3658mm) ByPass Track Set - 250lb. (Aluminum)

Question 27

Can they be keyed alike View answer

Asked 3 ´years ago | Schlage Plymouth Keyed Entry Door Knobset (Keyed Entry - Polished Brass - Adjustable Backset)

Question 28

What are the dimensions. View answer

Asked 3 ´years ago | Deltana Solid Brass Finials, Ball Tip - PAIR (Flat Black)

Question 29

Buying levers. Need to specify handing which it won't let me do. Therefore I can't put these in my cart. View answer

Asked 3 ´years ago | Schlage Accent Door Lever Set

Question 30

How much weight will this hook hold. View answer

Asked 3 ´years ago | Sugatsune 304 Stainless Steel 1" (25mm) Utility Hook (Satin)

Question 31

TRE-LED-OVLDS-NI View answer

Asked 3 ´years ago | Tresco 12VDC Door Sensor Controller - EACH

Question 32

Does the 14" just measure the shelf support? I have a 16" deep shelf to support View answer

Asked 3 ´years ago | Taymor 12-1/4" (311mm) Adjustable Shelf and Closet Rod Bracket - EACH (White)

Question 33

Does this product have two screw holes or one screw hole? View answer

Asked 3 ´years ago | Top Knobs Mercer 6" (152mm) Center-to-Center Glacier Cabinet Pull (Honey Bronze)

Question 34

How far apart are the screw holes? View answer

Asked 3 ´years ago | Ives Aluminum Window Lock (Aged Bronze)

Question 35

Can you tell me the thickness of this lock cam and also the size of the mounting hole? Thanks View answer

Asked 3 ´years ago | Olympus Cascade 3" (76mm) Disc Tumbler Cam - Straight

Question 36

What are the overall dimensions of the 3" cam? Length, width, and thickness? View answer

Asked 3 ´years ago | National 3" (76mm) Disc Tumbler Cam - Straight

Question 37

Single or pair? View answer

Asked 3 ´years ago | Deltana Solid Brass 2-1/2" (64mm) x 1-11/16" (43mm) Flush/Full Inset Non-Self Closing Ball Tip Cabinet Hinge - EACH (Flat Black)

Question 38

difference between single and double View answer

Asked 3 ´years ago | Sugatsune IF Inset Receding Door Mechanism - Single Type - 16" Slide

Question 39

can this be cut to fit a 42" opening View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - KV 48" (1219mm) Roll-Ezy Aluminum Track Set - For 1/4" Thick Small to Med. Glass Sliding Doors

Question 40

Is this grill (RE25 Decorate Grill - Antique Brass) suitable for panels in cabinet doors in a mudroom? View answer

Asked 3 ´years ago | Designs of Distinction Decorative Grilles 0.1875" Flat Square

Question 41

What is the minimum vertical space needed for installation of the Rev a shelf? View answer

Asked 3 ´years ago | Rev-A-Shelf Heavy Duty Appliance Lift w/Soft-Close - (Silver)

Question 42

Our outside doors are outswinging doors for hurricane. Is there a push pull entry knob for outswinging doors?? View answers

Asked 3 ´years ago | Brinks Lindingham Push-Pull-Rotate Door Knobset (Dummy - Tuscan Bronze)

Question 43

Did Grass stop manufacturing these or did you just stop carrying this part? View answer

Asked 3 ´years ago | Grass Integra Screw-on Front Fixing Bracket for Integra Quick 9113/9213/9313 - Left Hand - EACH

Question 44

Does it come with a key? View answer

Asked 3 ´years ago | Emtek Select Knurled L-Square Door Leverset w/Square Rosette

Question 45

is price lister per hinge or per box of 2 units View answer

Asked 3 ´years ago | Sugatsune 3-Way Adjustable Concealed Hinge for 1-1/8" (29mm) Min. Thick Doors - EACH (Black)

Question 46

Do these come with mounting hardware? View answer

Asked 3 ´years ago | Peter Meier CAMAR® 556 Square Furniture Leg, Matte Black - 6" Height (Set of 4)

Question 47

I would like to add casters to the 34" table legs, how much height to the casters add? View answer

Asked 3 ´years ago | Peter Meier 666 Zoom 34-1/4" Counter Height Table Legs with Adjustable Foot and Optional Casters

Question 48

Can this be cut to 66” View answer

Asked 3 ´years ago | Designs of Distinction Finishing Touches 1/2" (13mm) x 72" (1829mm) Aluminum L-Channel - Flat Black

Question 49

Does this item come in gold View answer

Asked 3 ´years ago | Expo Design "The Shelf Clip" Shelf Brackets - For 3/8"-1/2"Thick Glass/Shelf - PAIR (Frosted Chrome)

Question 50

Are these flanges rust proof since it's stainless steel? I plan to use in the bathroom. View answer

Asked 3 ´years ago | Epco Stainless Steel Closed Flange Closet Rod Support - Accepts a 1-1/16" Rod - EACH (Polished Stainless)

Browse by Topic

Tools