Question 1

Screw Hole Distance for the dragonfly doorbell? View answer

Asked 2 ´years ago | Waterwood Solid Brass Dragonfly Doorbell Button

Question 2

Asked 1 ´year ago | QuickScrews #8-32 x 1-3/4" Breakaway Machine Screws - For Cabinet Knobs & Pulls (Zinc, Truss Head, Phillips/Slotted Combo)

Question 3

Hi, is $106.25 for (1) or (2) Sugatsune IF-360 hinges? View answer

Asked 1 ´year ago | Sugatsune IF Inset Receding Door Mechanism - Single Mechanism

Question 4

Is it possible to install this on 1/2” thick glass doors? View answer

Asked 1 ´year ago | First Impressions Castle 1 13-1/8" (333mm) Center-to-Center Reeded Door Pulls - PAIR (Satin Nickel)

Question 5

How deep does wall that it attaches to need to be? View answers

Asked 4 ´years ago | Hafele Synergy Elite 14-1/4" (362mm) Closet Valet Rod (Matte Nickel)

Question 6

Does the ball catch come with slotted screw fasteners? View answer

Asked 1 ´year ago | Epco 1-11/16" (43mm) Adjustable Tension Ball Catch (Dull Brass)

Question 7

Does this work on an out swing door View answer

Asked 3 ´years ago | DoorSaver 3 Residential Hinge Pin Door Stop (Flat Black)

Question 8

Are SUG-J95-C24-25T-NI-S sold in pairs? Or as singles? View answer

Asked 3 ´years ago | Sugatsune 95° Heavy-Duty Concealed Hinge - EACH (25mm Overlay, Self-Closing, Screw-On, Satin Nickel)

Question 9

What size cabinet do I need to order for this to fit correctly View answer

Asked 4 ´years ago | Rev-A-Shelf Wood Vanity Cabinet Pull Out Organizer w/Power Outlets and Soft Close

Question 10

Does this come in white? View answer

Asked 1 ´month ago | Omega National 32" (813mm) Kidney Shelf & Swivel Bearing - 2 Shelf Set (Maple)

Question 11

Does this hinge come install instructions and do I need a jig? View answer

Asked 3 ´years ago | Sugatsune 95° Heavy-Duty Concealed Hinge - EACH (Inset, Free-Swinging, Screw-On, Satin Nickel)

Question 12

How thick is it? View answer

Asked 3 ´years ago | Don-Jo 2-1/4" (57mm) x 1-1/8" (29mm) Latch Door Filler Plate - EACH (Primed)

Question 13

What is the O.D. of the brass end bracket for 1" tubing? View answer

Asked 10 ´months ago | Wall Flange Fitting for 1" Diameter Tubing (Unlacquered Polished Brass)

Question 14

Custom lengths View answer

Asked 4 ´years ago | Solid Brass 1/2" (13mm) x 1/2" (13mm) Flat U Channel for 1/4" Thick Glass - (Unlacquered Polished Brass)

Question 15

Does this have 3 parts? Do the ends come off so that the center bar could be cut down? View answer

Asked 3 ´years ago | Top Knobs Pennington 24" (610mm) Center-to-Center Appliance Bar Pull (Flat Black)

Question 16

What are the dimensions of the accuride bottom mount drawer slides, both with and without brackets extended? View answer

Asked 2 ´years ago | Rev-A-Shelf 18in.(457mm) Accuride Bottom Mount Slides for Custom Shelving - PAIR

Question 17

What are the overall dimensions of the 3" cam? Length, width, and thickness? View answer

Asked 3 ´years ago | National 3" (76mm) Disc Tumbler Cam - Straight

Question 18

Can you tell me the thickness of this lock cam and also the size of the mounting hole? Thanks View answer

Asked 3 ´years ago | Olympus Cascade 3" (76mm) Disc Tumbler Cam - Straight

Question 19

How many locking positions? and can it fold back either to the left or right against the wall? View answer

Asked 4 ´years ago | Seachrome Wellness 36" (914mm) Wall-to-Wall Swing Away Grab Bar - (Satin Stainless Steel)

Question 20

What is the metal thickness this corner brace? View answer

Asked 3 ´years ago | National MP124BCZN2 Heavy Duty Corner Brace - EACH (Zinc Plated)

Question 21

The square hole in the cam, What are the dimensions? Thank you! View answer

Asked 3 ´years ago | National 2" (51mm) Disc Tumbler Cam - Straight

Question 22

How far apart are the screw holes? View answer

Asked 3 ´years ago | Ives Aluminum Window Lock (Aged Bronze)

Question 23

Do you supply UK ? View answers

Asked 4 ´years ago | Coastal Bronze 7" Drop Bar Passage Latch w/Ring Pull - Each

Question 24

Does the dummy set come with 2 doorknobs View answers

Asked 4 ´years ago | Emtek Modern Disc Glass Door Knobset with Disk Rosette (Passage - Oil Rubbed Bronze - 2-3/8in. Backset)

Question 25

what are the exact dimensions? View answers

Asked 4 ´years ago | Epco Closet Rod Center Support - Accepts a 1-5/16" Round Rod - EACH (Oil Rubbed Bronze)

Question 26

Can screw length be changed? View answer

Asked 4 ´years ago | Sietto Glacier 1-1/4" (32mm) Round Glass Cabinet Knob (Aqua) - Oil Rubbed Bronze

Question 27

Shaft size View answer

Asked 4 ´years ago | Knape and Vogt 8092 Series Pivot Pocket Door Slides with Attached Baseplates

Question 28

SEL-KGB98U says it's a 3/8 in. barrel nut, but when I go to the part on your site, it shows that 3/4. View answer

Asked 4 ´years ago | Selby 3/4" (19mm) Steel Barrel Nut - EACH

Question 29

What size are the screws that come with this hinge? Are slotted screws available or only phillips? View answer

Asked 4 ´years ago | Deltana Solid Brass 3" x 3" Hinge - Square Corner - EACH (Flat Black)

Question 30

Does the 14" just measure the shelf support? I have a 16" deep shelf to support View answer

Asked 3 ´years ago | Taymor 12-1/4" (311mm) Adjustable Shelf and Closet Rod Bracket - EACH (White)

Question 31

I have a double pocket door. Is there a way to lock the doors together from both the inside, and outside? View answer

Asked 3 ´years ago | Deltana Heavy-Duty Solid Brass Pocket Door Privacy Latch - EACH (Oil Rubbed Bronze)

Question 32

does Lemans 11 KS-LM60 come in a left hand unit. (blind side on the right. View answer

Asked 3 ´years ago | Kessebohmer LeMans II 60 - 21in. Corner Pullout 2-Shelf Set - Right Hand Swing (Chrome/White)

Question 33

Is it possible to buy three National locks not keyed alike? View answer

Asked 1 ´year ago | National 7/8" Pin Tumbler Drawer Lock - Keyed Alike #915 (Antique Brass)

Question 34

What is the max door thickness? View answer

Asked 4 ´years ago | Sugatsune 3-Way Adjustable Concealed Hinge for 1-3/8"(35mm) Min. Thick Doors - EACH (Dull Chrome)

Question 35

How much weight will this hook hold. View answer

Asked 3 ´years ago | Sugatsune 304 Stainless Steel 1" (25mm) Utility Hook (Satin)

Question 36

Does this hinge work on a cabinet with a frame, or is it for frameless cabinets? View answers

Asked 4 ´years ago | Selby 150° Opening Surface Mount Concealed Hinge - EACH (Nickel)

Question 37

Are they reversible for rihgt and left hand doors? View answer

Asked 3 ´years ago | Deltana Solid Brass 4-3/8" (111mm) x 1-7/8" (48mm) Heavy Duty Pivot Door Hinge - PAIR (Polished Nickel)

Question 38

What's the thickness of the wood View answer

Asked 12 ´months ago | Woodfold 16" (406mm)Slat Length x 24" (610mm) Solid Wood Flat Tambour w/Radius Edges - EACH (Red Oak)

Question 39

Is the insert shape oval or rectangular and what are the dimension (W and L) of the insert? View answer

Asked 1 ´month ago | Emtek Solid Brass 6" (152mm) Scalloped Flush Pull - EACH - (Satin Brass)

Question 40

Is a new soft bag available for home hardware recycling bins? View answer

Asked 1 ´year ago | Rev-A-Shelf Bottom Mount Recycling Center Waste System w/Soft-Close - Multi-Color

Question 41

What is the distance between the screw holes on the drawer track guide? View answer

Asked 1 ´year ago | Bainbridge Rear Mount Drawer Slide Guide - EACH (Natural)

Question 42

Do you still have it in aerosol spays? I used it in Canada almost 20 years ago. Great product! View answer

Asked 1 ´year ago | Fastcap 2P-10 Kit Adhesive System - SET

Question 43

What is the weight capacity of the National 282/8 Heavy Duty Hinge? View answer

Asked 1 ´year ago | National 282 8" (203mm) Heavy Duty Tee Hinges - EACH (Zinc)

Question 44

I need an Emtek Imperial dummy set for my double doors. Do you carry emtek door entry sets? View answer

Asked 1 ´year ago | Emtek Imperial Door Entry Set

Question 45

is there a right and left atl-6103-ab cabinet door hinge? View answer

Asked 3 ´years ago | THH 3/8" Inset Knife/Pivot Hinge - PAIR (Antique Brass)

Question 46

Can the slats be cut?for instance I have a 25.5” opening. View answer

Asked 4 ´years ago | Woodfold 36" (914mm)Slat Length x 24" (610mm) Solid Wood Flat Tambour w/Radius Edges - EACH (Maple)

Question 47

I am looking for a similiar bracket to hold a 16 deep glass shelf. any ideas View answer

Asked 2 ´months ago | Expo Design "Bar Bracket" Shelf Brackets - For 1/4" to 1-1/4" Thick Glass/Shelf - PAIR (Satin Black)

Question 48

How tall is the unit? View answer

Asked 1 ´year ago | Fastcap Universal Big Foot for use with 3rd Hand HD - EACH

Question 49

What is the width of top and bottom frames View answer

Asked 4 ´years ago | KV 48" (1219mm) Ball-Bearing Track Set For 1/4" Thick Large Glass Sliding Doors

Question 50

what size is the threaded diamiter? View answer

Asked 4 ´years ago | Hager Door Holder Replacement Tip - EACH (Grey )

Browse by Topic

Tools