Question 1

Can this be installed in a cabinet with a drawer above it? View answer

Asked 3 ´years ago | Rev-A-Shelf Heavy Duty Appliance Lift w/Soft-Close - (Silver)

Question 2

Does Hafele make a foot pedal for the 503.70.555 Euro Cargo Trash Bins? View answer

Asked 4 ´years ago | Hafele Euro Cargo 60 - Double 37 Quart Pullout Waste Containers with 2 Smaller Bins - (Silver)

Question 3

is this item in stock ? View answer

Asked 4 ´years ago | Top Knobs Grace - Riverside 12" (305mm) Center-to-Center Appliance Pull (Polished Chrome)

Question 4

The screw holes are not visible. How is the cover removed in order to expose the screw holes? Any instructions? View answer

Asked 4 ´years ago | Linnea Stainless Steel Curved Handrail Bracket (Satin Stainless Steel)

Question 5

Hi! How long are the rails the mirror pulls out with; on the wall, and fully extended? Thank you! View answer

Asked 4 ´years ago | Sidelines by Rev-A-Shelf 47-1/4" (1200mm) Tri-Fold Closet Mirror w/Soft-Close

Question 6

Is this a set or just one bar? View answers

Asked 3 ´years ago | Emtek 72" (1829mm) Stainless Steel Square Long Door Pull, 60" (1524mm) Center-to-Center (Concealed Surface Mount, Flat Black)

Question 7

Will this work on a cafe dishwasher? View answer

Asked 3 ´years ago | Schwinn Design 2389/480 18-7/8" (479mm) Center-to-Center Appliance Pull (Matte Gold)

Question 8

What is the difference between the Hamilton Strathmore wall vs floor register? View answer

Asked 4 ´years ago | Hamilton Strathmore Floor Register - 12 x 4in. (Polished Brass Lacquered)

Question 9

So these tracks come in for 3/4” materia or 1/4” is the maximum? View answer

Asked 3 ´years ago | KV 36" (914mm) Ball-Bearing Track Set For 1/4" Thick Large Glass Sliding Doors

Question 10

Brown plastic strike plate View answer

Asked 4 ´years ago | Epco Mini Roller Touch Latch (Brass/Brown)

Question 11

Is SGS-158-4-US15 Residential Door Hinge a Heavy Duty Hinge View answers

Asked 3 ´years ago | SGS Residential Duty 4" x 4" Hinge - 5/8in. Radius Corner - EACH (Satin Nickel)

Question 12

I need 48" brass standards and clips View answer

Asked 3 ´years ago | Knape and Vogt 48" (1219mm) Shelf Standard - EACH (Zinc)

Question 13

Is this hardware ADA compliant? View answer

Asked 3 ´years ago | Sugatsune Stainless Steel 3-15/16" (100mm) Sliding Door Pull for 1-3/8" (35mm) Thick Door - (Satin Stainless Steel)

Question 14

If I get two of these, can I take the inside from each set and make one latching pass-through door? View answers

Asked 4 ´years ago | Deltana Heavy-Duty Solid Brass Pocket Door Privacy Latch - EACH (Oil Rubbed Bronze)

Question 15

What is the dimension of the inner sleeve? View answer

Asked 4 ´years ago | Flush End Cap for 2" Diameter Tubing (Polished Stainless Steel)

Question 16

How many hinges come in package? View answer

Asked 4 ´years ago | Amerock 30° Reverse Bevel Variable Overlay Face Frame Mount Self Closing Cabinet Hinge - PAIR (Burnished Brass)

Question 17

What is the thread specs? I have heavy doors and the picture looks exactly what I need. View answers

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Grant 7000 Series 7222 Top Plate for Ball-Bearing Carrier - EACH (150lb.)

Question 18

Can 78” rail handle a 38” opening/door or is 36” max door size for fully exposed opening wit door opened? View answer

Asked 3 ´years ago | US Futaba 78" (1981mm) Round Rail Sliding Barn Door Track Set with Soft-Close, Top Door Mounted - 260lb. (Stainless Steel)

Question 19

what is thickness of steel side roller brackets? View answer

Asked 3 ´years ago | Knape and Vogt 22-5/8" (575mm) Center Mount Drawer Slide - Set

Question 20

Does it include screws and if so how long are they? View answer

Asked 4 ´years ago | Amerock Woods 2" (51mm) Cabinet Knob - 2/pack (Unfinished Birch)

Question 21

as I face my door, my door hinges are on the left, so I understand I should order left handing View answer

Asked 4 ´years ago | Emtek Electronic Keypad Entry Handleset - Modern Style

Question 22

what are the dimensions? Can it support a glass self 23 inched wide, 18 inches long? View answer

Asked 3 ´years ago | Gatco Latitude II 20" (508mm) Glass Shelf (Matte Black)

Question 23

Will this work in adjusting a pocket door View answer

Asked 3 ´years ago | Johnson Hardware Adjustment Wrench - EACH

Question 24

Is this or just one pull or do they come in bags of two or four View answer

Asked 3 ´years ago | Buck Snort Lodge 1-3/4" (44mm) Seashell Cabinet Knob (Antique Brass)

Question 25

Is the bucket stainless steel or plastic? Is there a removable plastic liner bucket within the steel container? View answer

Asked 3 ´years ago | Rev-A-Shelf 11 Liter Counter Mount Waste Container w/ Stainless Steel Lid

Question 26

What is your return policy? View answer

Asked 4 ´years ago | Designs of Distinction 6" (152mm)H Urban Square Tapered Foot w/Hanger Bolt

Question 27

Where does the product ship from? View answer

Asked 4 ´years ago | Selby Interlocking Flushmount - SET (Zinc Plated)

Question 28

Hello, to have this painted on a custom color how can I do it? View answer

Asked 4 ´years ago | LCN 4040XP Series Door Closer, Non-Sized - Non-Handed (Aluminum)

Question 29

The thickness of your countertop brackets appears to jump from 3/16” to 3/4” ! That’s a big jump! View answer

Asked 3 ´years ago | Fastcap Speedbrace Stealth Countertop Bracket - EACH (Primer)

Question 30

This item says it's depth is 6 1/2" - does that mean from the wall to the front edge? What is the height? View answer

Asked 4 ´years ago | Gatco Spa 20" (508mm) Towel Shelf with Bar (Polished Chrome)

Question 31

Can I purchase only sets of Heavy duty spring designed for trays 16" View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Rev-A-Shelf Sink Front Tip-Out Tray Hinges - PAIR (Steel)

Question 32

I have a 1 1/16" door thickness. What size hole must I use for your latch? View answer

Asked 3 ´years ago | First Watch Passage Latch Set - EACH (Satin Nickel)

Question 33

Would you cut this track into two section of 36" and ship them and the left over piece without the surcharge? View answer

Asked 4 ´years ago | Johnson 111 Series 96" (2438mm) Heavy-Duty Sliding Box Track - EACH (Aluminum)

Question 34

Sugatsune LIN-X600 - frame-and-panel door View answer

Asked 4 ´years ago | Sugatsune LIN-X600 Lateral Opening Door System - for Medium Cabinet Door up to 25-9/16"W - (Anodized Nickel)

Question 35

How deep is this product? I need a flange that is only an 1" in depth View answer

Asked 4 ´years ago | Wall Flange with Cover for 1-1/2" Diameter Tubing (Unlacquered Polished Brass)

Question 36

I need this item in a set. I cant find Please View answer

Asked 4 ´years ago | Emtek Solid Brass Modern Orion Door Entryset (Double Cylinder - Triton Lever - Oil Rubbed Bronze - Left Hand - 2-3/4in. Backset)

Question 37

is this for a blind corner cabinet? View answer

Asked 4 ´years ago | Vauth Sagel Oko Center Swing-Out Waste Bin System, Quad 20-Quart - (White)

Question 38

WHAT ARE IS THE SIZE OF Hickory Hardware 1/4" Overlay Double Demountable Self Closing Cabinet Hinge - PAIR (Antique View answers

Asked 3 ´years ago | Hickory Hardware 1/4" Overlay Double Demountable Self Closing Cabinet Hinge - PAIR (Antique Brass)

Question 39

Do you have 1" diameter round View answer

Asked 4 ´years ago | Deltana Solid Brass 1-1/2" (38mm) Round Flush Pull HD - EACH (Flat Black)

Question 40

is included hinge plate? View answer

Asked 4 ´years ago | Grass 160° Tiomos 00 Crank Hinge - EACH (Full Overlay, Soft-Closing, Dowelled)

Question 41

is this product made in the US? View answer

Asked 4 ´years ago | Abbey Trading Gatemate 18-1/2" (470mm) Cranked Bands and Hooks - PAIR (Black)

Question 42

if i order 3 locks can i have them keyed the same View answer

Asked 3 ´years ago | Marks Keyed Entrance Lever Lock - EACH (Brushed Chrome)

Question 43

regarding sch-16-210-613 can you remove the endplate and just use the round tubular sleeve? View answer

Asked 3 ´years ago | Schlage F-Series Spring Latch, Adjustable Backset Triple-Option Mortise and Drive-In - EACH (Oil Rubbed Bronze)

Question 44

How many screws does the 8x34 kickplate use? I need a kickplate with 5 screws across not 6. Thank you. View answer

Asked 4 ´years ago | Brass Accents Solid Brass Kick Plate - EACH (Antique Brass)

Question 45

Good morning, Is it possible to have the CAD drawing in 3D or 2D of this hinge # HS8303L Double-Locking Bifold Doo View answers

Asked 4 ´years ago | Selby 2-1/2" (64mm) Double Locking Bi-Fold Door Hinge - EACH (Dark Brown)

Question 46

My square hole looks bigger. My hole is 5/16" just shy of 3/8' square. How big is yours View answer

Asked 4 ´years ago | National 1-3/4" (44mm) x 1/2" Offset Disc Tumbler Cam - Double Formed

Question 47

Is this simply the galvanized version painted black? View answer

Asked 4 ´years ago | Abbey Gatepro 18" (457mm) Adjustable Bands and Hooks Strap Hinge - PAIR (Hot Dipped Galvanized)

Question 48

what garbige liner for How to Measure your Cabinet Opening RV-20-52 Rev-A-Shelf 20 Qt. Replacement Waste Containe View answers

Asked 3 ´years ago | Rev-A-Shelf 20 Qt. Replacement Waste Container Only - White

Question 49

Will this work for 23" wide drawers? Spec says up to 12" wide but that's not a very wide drawer. View answer

Asked 3 ´years ago | Accuride 2002C 24" (610mm) Two-Way Drawer Slides - PAIR

Question 50

Why do you not have letters, specifically N,W,S, View answer

Asked 3 ´years ago | Emtek 7" (178mm) Modern House Numbers - (Flat Black)

Browse by Topic

Tools