Question 1

Polished Brass View answer

Asked 4 ´months ago | Designs of Distinction Finishing Touches Gallery Rail End Post

Question 2

I have a broken RH and the number on the side is 7523-16/394/381 what is your part number to match this/ View answer

Asked 4 ´months ago | Grass Elite Plus-16 2-D Concealed Soft-Close Full-Extension Drawer Slide - PAIR

Question 3

Does the hinge have only one adjusting screw View answer

Asked 4 ´months ago | Grass 110° Nexis (Mepla CS22/00) 00 Crank Hinge - EACH (Full Overlay, Self-Closing, Screw-On)

Question 4

Will this work on a drawer 23.75"w x 19.25" long View answer

Asked 4 ´months ago | CompX Timberline Letter Width File Rail Set - (Black)

Question 5

What is overall length of the bit? View answer

Asked 4 ´months ago | Castle Premium 9/64 in. Split Point Drill Bit - EACH

Question 6

Can you mount the 9" slides onto the bottom of the cabinet or do they have to be side mounted? View answer

Asked 4 ´months ago | Blum 21" (533mm) TANDEM plus BLUMOTION 563H Concealed Soft-Close Full-Extension Drawer Slide - PAIR

Question 7

Can I use this hinge for an outdoor door? View answer

Asked 4 ´months ago | Sugatsune 160° Heavy-Duty Concealed Hinge - EACH (25mm Overlay, Soft-Closing, Satin Nickel)

Question 8

Need this in gold color View answer

Asked 4 ´months ago | Notting Hill 3" (76mm) Center-to-Center Kensington Bin Pull (Antique Pewter)

Question 9

is this unlacquered? View answer

Asked 4 ´months ago | Emtek Solid Brass 18" (457mm) Center-to-Center Bar Appliance Pull - (Satin Brass)

Question 10

Is this latch solid brass or brass plated View answer

Asked 4 ´months ago | Belwith Keeler Vintage 1900 1-3/4" (44mm) Cabinet Latch (Satin Brass)

Question 11

If i wanted to us an 18in piece of glass are these cables long enough? View answer

Asked 4 ´months ago | Expo Design Cable Shelf Kit - Set (Aluminum)

Question 12

What are the dimensions of this device. View answer

Asked 4 ´months ago | National Full Mortise Chest/Cabinet/Lid Lock - Keyed Alike (Satin Brass)

Question 13

how long is it View answer

Asked 4 ´months ago | Accuride 4180-0745-XE Face Frame Mounting Kit for 3832EC Slides - Set (Zinc)

Question 14

Is the Sugatsune DSR701 Surface Mount Door Straightener suitable for 3/4" melamine doors? View answer

Asked 4 ´months ago | Support

Question 15

is this for a pair /set or sold individually View answer

Asked 4 ´months ago | Grass Nexis (Mepla CSPPC) Pie Cut Corner Hinge - EACH (Self-Closing, Dowelled)

Question 16

Do mounting plates come with? View answer

Asked 4 ´months ago | Blum 110° CLIP top BLUMOTION Hinge (Full Overlay, Soft-Close, Screw-on)

Question 17

Is any part of this product reflective? (So that emergency responders can more easily read the letters at night.) View answer

Asked 4 ´months ago | Whitehall Modern Vertical Address Plaque - (Oil Rubbed Bronze)

Question 18

How thick can the gate be? View answer

Asked 4 ´months ago | Abbey Gatepro 2-3/4" Double Cylinder Keyed Long Throw Rim Lock Keyed Alike - EACH (Black/Stainless/Brass)

Question 19

how deep can top be View answer

Asked 4 ´months ago | Sugatsune 304 Stainless Steel 12" (305mm) Heavy-Duty Folding Bracket with Soft-Close - EACH (Electro Polished)

Question 20

Is this keylockable from both sides? Or maybe another model? Randy View answer

Asked 4 ´months ago | Abbey Gatepro 2-3/4" Single Cylinder Keyed Long Throw Rim Lock Keyed Different - EACH (Black/Stainless/Brass)

Question 21

What length is the screw which comes with this hook? View answer

Asked 5 ´months ago | Sugatsune 304 Stainless Steel 1-9/16" (40mm) Utility Hook (Satin)

Question 22

what is the length of the threaded part of this hook? View answer

Asked 5 ´months ago | Sugatsune 304 Stainless Steel 1-3/8" (35mm) Key Hook (Polished)

Question 23

Doug G. View answer

Asked 5 ´months ago | Knape & Vogt 10" (254mm) Steel Support Hinge - PAIR

Question 24

What is the tolerance on the inner diameter of the hole? View answer

Asked 5 ´months ago | Cut Wall Flange Fitting for 1-1/2" Diameter Tubing (Satin Stainless Steel)

Question 25

Where is the screw located to attach this man handle? Left hand? Center of body? View answer

Asked 5 ´months ago | Soko Manhandles 6-7/8" (175mm) Center-to-Center Left Cabinet Pull

Question 26

Where can I get replacement brackets for this mirror they were not in the box and someone gave us this mirror View answer

Asked 5 ´months ago | Gatco Tavern 24" (610mm) x 32" (813mm) Large Oval Beveled Mirror (Polished Nickel)

Question 27

Do you ship MLCambell Krystal Conversion finish to Virginia View answer

Asked 5 ´months ago | Sales

Question 28

What is the total width and width of track between rollers? View answer

Asked 5 ´months ago | Knape and Vogt 144" (3658mm) Double Door Track - For use with KV Roll-Ezy 1/4in. Aluminum Cabinet Track System - EACH (Aluminum)

Question 29

I have this towel bar but need to remove for a remodel. Can you help me? I can’t get the escutcheons off the wall. View answer

Asked 5 ´months ago | Emtek Modern Brass 30" (762mm) Towel Bar - Square Rosette

Question 30

do you have 4" double acting hinges in black? View answers

Answer posted 5 months ago | Deltana 4" (102mm) Double Acting Spring Hinge - EACH (Paint Black)

Question 31

is there a matching horizontal hang track? View answer

Asked 5 ´months ago | Knape and Vogt 10-1/2" (267mm) Heavy-Duty Decorative Double Slot Shelf Bracket - EACH (White)

Question 32

Can the low voltage light in the button be run from a 16 V AC supply or does it need to be a DC supply? View answer

Asked 5 ´months ago | Waterwood Hand Painted Cat Doorbell Button - (Blue)

Question 33

Is there no lid for the 20 quart container? View answer

Asked 5 ´months ago | Rev-A-Shelf 20 Qt. Replacement Waste Container Only - White

Question 34

Dimensions of brass elbow part 882-20 View answer

Asked 5 ´months ago | Flush Curved Elbow Fitting for 2" Diameter Tubing (Unlacquered Polished Brass)

Question 35

1) Will these hinges keep the door put in an open position? 2)Is there resistance when closing (soft/gentle close)? View answer

Asked 5 ´months ago | Sugatsune 3-Way Adjustable Concealed Hinge for 1-1/2" (38mm) Min. Thick Doors - EACH (Matte Black)

Question 36

would a pair of HDS-20ML-BL work with a 3/4" thick Doug fir lid measuring 25.75" deep and 29" wide weighing 14lbs. View answer

Asked 5 ´months ago | Sales

Question 37

Looking at your image, It's unclear how it hinges. View answer

Asked 5 ´months ago | Sugatsune 304 Stainless Steel 2-3/8" (60mm) Double Action Hinge - EACH

Question 38

Do they have screw holes to attach View answer

Asked 5 ´months ago | Maurice Franklin 4" (102mm) Louver & Screen Vent - EACH (White)

Question 39

does this product fit a 1.5" door width? emtek 451923 View answer

Asked 5 ´months ago | Emtek Cast Bronze Brighton Door Entry Set

Question 40

Our door is 6ft wide pocket door. Will this work or a different product View answer

Asked 5 ´months ago | Sugatsune MFU-1200 MonoFlat Unison Light-Duty Flush Sliding Door Opening System - (44-88lbs.)

Question 41

What is the maximum thickness of the door that this hinge will fit? View answer

Asked 5 ´months ago | Blum 125° CLIP top BLUMOTION Thick Door Hinge (Full Overlay, 0 Protrusion, Screw On, Soft-Close)

Question 42

Is your price per knob? View answer

Asked 5 ´months ago | Buck Snort Lodge 1-1/4" (32mm) Acorn Cabinet Knob (Antique Brass)

Question 43

does this come in a 48" length? View answer

Asked 5 ´months ago | Pemko 36" (914mm) Door Shoe Replacement Vinyl - EACH (Gray)

Question 44

My current hinge for lazy Susan is about 3” long . Do you have a 165 degree that size? View answer

Asked 5 ´months ago | Hafele Hinge Clip-on, 165°, full overlay, Soft-Close, steel, nickel-plated, Mod 14

Question 45

Hi there, can i have sent your finish samples? View answer

Asked 5 ´months ago | Emtek Modern Solid Brass Mortise Pocket Door Keyed Lockset (Flat Black - 1-3/4in. Thickness)

Question 46

Where can I get lock strip to use with this product? View answer

Asked 5 ´months ago | Pemko Spring Bronze Weatherstrip - 17ft. Roll (Bronze/Brass)

Question 47

Is this available to a hobbyist not commercial View answer

Asked 5 ´months ago | M.L. Campbell Polarion X Exterior Clear Polyurethane (1 Gallon)

Question 48

50mm backsets? View answer

Asked 5 ´months ago | Dexter Spring Latch, Adjustable Backset Dual-Option Mortise and Drive-In - EACH (Satin Stainless Steel)

Question 49

My drawers are made from 3/8 material. Will these work? View answer

Asked 5 ´months ago | Salice Progressa Smove 15" (381mm) Concealed Soft-Close Full-Extension Drawer Slide - PAIR

Question 50

How much clearance from the existing hinge pin to the jam, does the door saver II require and not rub? View answer

Asked 5 ´months ago | DoorSaver II - Commercial Hinge Pin Door Stop

Browse by Topic

Tools