Question 1

is this wired or battery powered View answer

Asked 3 ´years ago | Deltana 3-1/4" (83mm) Rectangular Doorbell Button (Flat Black)

Question 2

Order sample View answer

Asked 3 ´years ago | Top Knobs Dakota 3" (76mm) Center-to-Center Bit Cabinet Pull (Brushed Satin Nickel)

Question 3

Is the Therma Tru sweep replacement made in the USA? View answer

Asked 3 ´years ago | THH 35-13/16" (910mm) Vinyl Door Bottom Sweep - Kerf Mount - EACH (Brown)

Question 4

Can you use these one 3/4" drawer thickness?

Asked 1 ´year ago | Blum MOVENTO 769. Heavy-Duty Concealed Soft-Close Full-Extension Drawer Slide, Frameless - PAIR

Question 5

Do you have this Emtek EMT-462222-L-FBS-LH-2.38 for thicker doors It saysFor 1-3/8 to 1-3/4in thick need 2.25 in? View answer

Asked 1 ´year ago | Emtek Wrought Steel San Carlos Door Entryset

Question 6

Does the MODO series have an appliance pull? View answer

Asked 3 ´years ago | Schaub and Company MODO 8" (203mm) Center-to-Center Cabinet Pull (Signature Satin Brass)

Question 7

Can you confirm that PEM-P51B17 is identical as your diagram including the bends in the metal ? View answer

Asked 1 ´year ago | Pemko Spring Bronze Weatherstrip - 17ft. Roll (Bronze/Brass)

Question 8

returns View answer

Asked 3 ´years ago | Emtek Narrow Modern Rectangular Solid Brass Mortise Pocket Door Keyed Lockset (Flat Black - 1-3/8in. Thickness)

Question 9

My door frame is 14 3/4 which looks to be too small for this model. Do you have a smaller size that might work?

Asked 1 ´year ago | Sugatsune SLUN Lapcon Vertical Swing Lift-Up (Lid Stay) Mechanism - PAIR (Nickel)

Question 10

I’m looking for the new hidden hinge the HES 2s with surface mount View answer

Asked 3 ´years ago | Sugatsune 3-Way Adjustable Concealed Hinge for 15/16" (23mm) Min. Thick Doors - EACH (Dull Chrome)

Question 11

Does this item come in gold View answer

Asked 3 ´years ago | Expo Design "The Shelf Clip" Shelf Brackets - For 3/8"-1/2"Thick Glass/Shelf - PAIR (Frosted Chrome)

Question 12

Do these come with mounting hardware? View answer

Asked 3 ´years ago | Peter Meier CAMAR® 556 Square Furniture Leg, Matte Black - 6" Height (Set of 4)

Question 13

Our outside doors are outswinging doors for hurricane. Is there a push pull entry knob for outswinging doors??

Asked 3 ´years ago | Brinks Lindingham Push-Pull-Rotate Door Knobset (Dummy - Tuscan Bronze)

Question 14

Does it come in black?

Asked 1 ´year ago | Sugatsune Sliding Door Privacy Latch with Indicator - EACH (Satin Stainless Steel)

Question 15

Does it come with a key? View answer

Asked 3 ´years ago | Emtek Select Knurled L-Square Door Leverset w/Square Rosette (Passage - Oil Rubbed Bronze - Left - 2-3/8in. Backset)

Question 16

What is the minimum vertical space needed for installation of the Rev a shelf? View answer

Asked 3 ´years ago | Rev-A-Shelf Heavy Duty Appliance Lift w/Soft-Close - (Silver)

Question 17

Do you have 18” drawer slides in stock? Soft close undermounts

Asked 4 ´years ago | Pride 18" (457mm) 100lbs. (45.359kg) Soft-Close Full Extension Undermount Drawer Slides - PAIR

Question 18

What is the rod diameter?

Asked 4 ´years ago | Deltana Standard 10" (254mm) Window Casement Stay Adjuster - EACH (Oil Rubbed Bronze)

Question 19

Can this be cut to 66” View answer

Asked 3 ´years ago | Designs of Distinction Finishing Touches 1/2" (13mm) x 72" (1829mm) Aluminum L-Channel - Flat Black

Question 20

can this be cut to fit a 42" opening View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - KV 48" (1219mm) Roll-Ezy Aluminum Track Set - For 1/4" Thick Small to Med. Glass Sliding Doors

Question 21

Single or pair?

Asked 3 ´years ago | Deltana Solid Brass 2-1/2" (64mm) x 1-11/16" (43mm) Flush/Full Inset Non-Self Closing Ball Tip Cabinet Hinge - EACH (Flat Black)

Question 22

Do you carry this product in stock? Or is it coming from a manufactuer?

Asked 4 ´years ago | Gatco Cafe 20-1/2" x 27-1/2" Oval Framed Beveled Mirror (Polished Chrome)

Question 23

Does this product have two screw holes or one screw hole? View answer

Asked 3 ´years ago | Top Knobs Mercer 6" (152mm) Center-to-Center Glacier Cabinet Pull (Honey Bronze)

Question 24

Ball Tee Fitting for 1-1/2" Diameter Tubing (Satin Stainless Steel) View answer

Asked 3 ´years ago | Ball Tee Fitting for 1-1/2" Diameter Tubing (Satin Stainless Steel)

Question 25

What are the overall dimensions of the 3" cam? Length, width, and thickness?

Asked 3 ´years ago | National 3" (76mm) Disc Tumbler Cam - Straight

Question 26

Can you tell me the thickness of this lock cam and also the size of the mounting hole? Thanks

Asked 3 ´years ago | Olympus Cascade 3" (76mm) Disc Tumbler Cam - Straight

Question 27

How far apart are the screw holes? View answer

Asked 3 ´years ago | Ives Aluminum Window Lock (Aged Bronze)

Question 28

one or two per package? View answer

Asked 4 ´years ago | Deltana Solid Brass 3" (76mm) x 2" (51mm) Flush/Full Inset Non-Self Closing Ball Tip Cabinet Hinge - EACH (Antique Brass)

Question 29

in full flush overlay construction would the false drawer front clear a door below ? View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Knape and Vogt Sink-Front Tip-Out Tray Scissor Hinges - PAIR (Zinc)

Question 30

how many screws are included?

Asked 3 ´years ago | Don-Jo Aluminum Door Flush Bolts - 1/8in. Offset (Silver Coated)

Question 31

Hole Separation

Asked 1 ´year ago | Hafele Floor Mounted Door Guide - EACH (Grey Plastic)

Question 32

Does the 14" just measure the shelf support? I have a 16" deep shelf to support View answer

Asked 3 ´years ago | Taymor 12-1/4" (311mm) Adjustable Shelf and Closet Rod Bracket - EACH (White)

Question 33

TRE-LED-OVLDS-NI View answer

Asked 3 ´years ago | Tresco 12VDC Door Sensor Controller - EACH

Question 34

does the required opening size include the thickness of an inset door or is the opening without the door thickness

Asked 8 ´months ago | Kessebohmer LeMans II 40 - 14in. Corner Pullout 2-Shelf Set - Left Hand Swing (Champagne/Maple)

Question 35

Will this work on an 18 inch wide cabinet?

Asked 8 ´months ago | Sugatsune SLUN Lapcon Vertical Swing Lift-Up (Lid Stay) Mechanism - PAIR (Nickel)

Question 36

What are the dimensions of this device.

Asked 9 ´months ago | National Full Mortise Chest/Cabinet/Lid Lock - Keyed Alike (Satin Brass)

Question 37

if i order 3 locks can i have them keyed the same View answer

Asked 3 ´years ago | Marks Keyed Entrance Lever Lock - EACH (Brushed Chrome)

Question 38

What is handing? View answer

Asked 4 ´years ago | Schlage Accent Keyed Entry Door Leverset (Keyed Entry - Polished Brass - Adjustable Backset)

Question 39

Can these be used for converging pocket doors? If so, can they latch (lock not necessary)? View answer

Asked 3 ´years ago | Sugatsune Stainless Steel Sliding Door Pull for 1-3/8in. Thick Door - (Satin Stainless Steel)

Question 40

Looking for blind hinge without dowels View answer

Asked 3 ´years ago | Salice 94° Blind Corner Inset Hinge - EACH (Self-Closing, Doweled)

Question 41

How do I re- attach to the wall? View answer

Asked 4 ´years ago | JVJ Paramount Euro Toilet Paper Holder - Single Post (Old World Bronze)

Question 42

Stanley 40-3534 Adjustable Floor Guide - EACH (For 1-3/8" to 1-3/4" ByPass Doors) View answer

Asked 4 ´years ago | Stanley 40-3534 Adjustable Floor Guide - EACH (For 1-3/8" to 1-3/4" ByPass Doors)

Question 43

Is the Sugatsune DSR701 Surface Mount Door Straightener suitable for 3/4" melamine doors?

Asked 9 ´months ago | Support

Question 44

Do these come in stainless steel View answer

Asked 3 ´years ago | Amerock 3/4" Full Inset Partial Wrap Non-Self Closing Cabinet Hinge With Ball Tips - EACH (Satin Nickel)

Question 45

what is the widest flat rail I can mount on this bracket to allow finger space to the wall? View answer

Asked 3 ´years ago | Better Home Jumbo Handrail Bracket (Matte Black)

Question 46

What is the inside diameter of the hole that accepts the knob?

Asked 3 ´years ago | First Watch Mortise Trim Plates - SET (Polished Brass)

Question 47

Do you have HAF-503-70-532 in stock? View answer

Asked 3 ´years ago | Hafele Euro Cargo 45 - Double 37 Quart Pullout Waste Containers - (Silver)

Question 48

Hinge pin is approx 3/8 inch and all the door stops have 1/4 inch hole. Do you have a product that will work with l View answer

Asked 3 ´years ago | DoorSaver Hinge Pin Door Stop (Oil Rubbed Bronze)

Question 49

my bifold doors are 30 inch...will this work or do you sell one with that works with that dimension?

Asked 3 ´years ago | BarnFold 2-Panel 28" (711mm) Bi-Fold Barn Door Track Set - (50 lb.)

Question 50

I am need of the covers that conceal the mounting and adjustment screws. Is it possible to order these?

Asked 8 ´months ago | Sugatsune 3-Way Adjustable Concealed Hinge for 1-1/2" (38mm) Min. Thick Doors - EACH (Dull Chrome)

Browse by Topic

Tools