Question 1

Do you have this available with the Interior Rosette screws concealed + strikeplate and latch bolt with radius edge View answer

Asked 3 ´years ago | Emtek Providence Glass Door Knobset w/Rectangular Rosette

Question 2

Can I get a 28’ roll? View answer

Asked 3 ´years ago | Pemko Spring Bronze Weatherstrip - 17ft. Roll (Bronze/Brass)

Question 3

If this drags across a hardwood floor when opening the door, will it it leave scratch marks on the surface? View answer

Asked 3 ´years ago | Pemko 36" (914mm) Door Bottom w/Neoprene Insert - EACH (Dark Bronze Anodized Aluminum)

Question 4

Does Anochrome look like stainless steel View answer

Asked 3 ´years ago | Knape and Vogt 14" (356mm) Single Slot Shelf Bracket - EACH (Anochrome)

Question 5

Do these plastic back supports also fit the kv 181 bracket? View answer

Asked 7 ´months ago | Knape and Vogt Back Support for the 180 Brackets - EACH (Clear)

Question 6

what garbige liner for How to Measure your Cabinet Opening RV-20-52 Rev-A-Shelf 20 Qt. Replacement Waste Containe View answers

Asked 3 ´years ago | Rev-A-Shelf 20 Qt. Replacement Waste Container Only - White

Question 7

anyway to get a black base with glass ball knob View answer

Asked 7 ´months ago | Lewis Dolin 1-1/8" (29mm) Glass Ball Cabinet Knob (Transparent Clear/Oil Rubbed Bronze)

Question 8

regarding sch-16-210-613 can you remove the endplate and just use the round tubular sleeve? View answer

Asked 3 ´years ago | Schlage F-Series Spring Latch, Adjustable Backset Triple-Option Mortise and Drive-In - EACH (Oil Rubbed Bronze)

Question 9

do you have matching Amerock Basic hinges? View answer

Asked 7 ´months ago | Amerock Basics 3-1/4" (83mm) Center-to-Center Cabinet Pull

Question 10

Why is the Emtek dummy lever (helios) with square rosette in satin nickel finish not available? View answer

Asked 4 ´years ago | Emtek Modern Helios Door Leverset w/Square Rosette (Passage - Oil Rubbed Bronze - Left - 2-3/4in. Backset)

Question 11

Hi Team, we want to buy 24nos of Pull down closet rod TAW-1200/G, Gray (Dimensions 800-1180x100x752(mm) 25mm dia, View answer

Asked 3 ´years ago | Sugatsune Tallman Double Closet Rod Lift Mechanism - (Gray)

Question 12

Do the woven basket pull outs come in shorter length than 21 1/4”? View answer

Asked 3 ´years ago | CLOSEOUT SPECIAL! - Rev-A-Shelf 18" Pull-Out Woven Basket w/Maple Rails

Question 13

if i order 3 locks can i have them keyed the same View answer

Asked 3 ´years ago | Marks Keyed Entrance Lever Lock - EACH (Brushed Chrome)

Question 14

Can Al kick plate be painted? View answer

Asked 3 ´years ago | Hager Kick Plate - 10" (254mm) x 28" (711mm) (Aluminum)

Question 15

How fest you can ship it? I need it soon is passable View answer

Asked 10 ´months ago | Hafele Rattle-Free Concealed Floor Door Guide - EACH (Black)

Question 16

Any chance you have a track that would work for a 72" opening? View answer

Asked 4 ´years ago | BarnFold 2-Panel 64" (1626mm) Bi-Fold Barn Door Track Set - (50 lb.)

Question 17

would it work on pocket door? View answers

Asked 3 ´years ago | Schlage Maximum Security Indicator Deadbolt (Matte Black)

Question 18

looking for 2 - economy counter height folding table legs View answer

Asked 3 ´years ago | Peter Meier 330 Prisma Economy 34-1/4" Table Legs - (Set of 4)

Question 19

Custom lengths View answer

Asked 4 ´years ago | Solid Brass 1/2" (13mm) x 1/2" (13mm) Flat U Channel for 1/4" Thick Glass - (Unlacquered Polished Brass)

Question 20

Will tray divider rails work when the bottom and top of the cabinet are not flush with the face frame (1/4" reveal) View answers

Asked 3 ´years ago | Omega National Tra-Sta Tray Organizer - Set of 4 (Maple)

Question 21

Is there a bottom recessed in floor guide track compatible with 7015 Floor Mount Door Guide mounted on door? View answer

Asked 3 ´years ago | Top Line Grant 1201 144" (3658mm) Heavy-Duty Aluminum I-Beam Single Track - EACH

Question 22

Where can I find the 34Q Waste Container in recycle Blue? I live in city and no extra room for a can that doesn’t f View answer

Asked 3 ´years ago | Rev-A-Shelf 35 Qt. Replacement Waste Container Only - White

Question 23

What are the dimensions of the base for the Atlas Homewares Erika 12" View answer

Asked 4 ´years ago | Atlas Homewares Erika 12" (305mm) Center-to-Center Pull (Brushed Nickel)

Question 24

What is the thickness of the double track for the KV 72" Roll-Ezy Aluminum Track Set 1/4"? View answers

Asked 3 ´years ago | CLOSEOUT SPECIAL! - KV 72" (1829mm) Roll-Ezy Aluminum Track Set - For 1/4" Thick Small to Med. Glass Sliding Doors

Question 25

Item Quantity View answer

Asked 3 ´years ago | Salice Silentia+ 106° Excenthree Face-Frame Hinge (1/2" Overlay, Soft-Closing, Screw-On)

Question 26

Do you have any other pics/views of this clavos - especially from the side and back? View answer

Asked 2 ´months ago | CLOSEOUT SPECIAL! - Agave Ironworks 1-1/4" (32mm) Medium Round Hammered Clavos- EACH

Question 27

How wide is the track? View answer

Asked 3 ´years ago | Johnson 138F 48" (1219mm) By-Pass Track Set w/Fascia for 1-3/8" Doors - 125lb. (Aluminum)

Question 28

Does this slip in to 1.5" tube or over? View answer

Asked 2 ´months ago | Decorative Dome End Cap for 1-1/2" Diameter Tubing (Unlacquered Polished Brass)

Question 29

Do you have the rod in 5/8”od View answer

Asked 1 ´year ago | Epco 48" (1219mm) Round Closet Rod - 1-1/16" (27mm) Diameter (Polished Stainless Steel)

Question 30

where are they made? View answer

Asked 12 ´days ago | HDPOCKETDOORS HD/80 Series Pocket Door Frame Kit for 34" x 96"H Door, Single Door Set - 2x6 Wall (176lbs.)

Question 31

is this for a pair /set or sold individually View answer

Asked 3 ´months ago | Grass Nexis (Mepla CSPPC) Pie Cut Corner Hinge - EACH (Self-Closing, Dowelled)

Question 32

How can I order door knobs or levers with mixed finishes (French Brass on on side Flat Black on the other) ? View answer

Asked 3 ´months ago | Emtek Egg Door Knobset w/Rectangular Rosette

Question 33

Hello, I need two 36" brass 3/4" unlaquared pieces. Thanks Mike View answer

Asked 5 ´days ago | Solid Brass Tubing - 3/4" (19mm) Diameter - (Unlacquered)

Question 34

Can the length be shortened to fit a smaller cabinet depth? I have a cabinet that is only 15 inches deep. View answer

Asked 1 ´year ago | Woodfold 23-1/4" (591mm) Breadboard Slides - PAIR

Question 35

Can i get Z075 5" in brass? View answer

Asked 1 ´year ago | Schwinn Design Z075 5" (128mm) Center-to-Center Flush Pull (Polished Chrome)

Question 36

Do they make this option with a key 🔑 View answer

Asked 1 ´year ago | Emtek Solid Brass Mortise Pocket Door Privacy Latch (Polished Brass - 1-3/4in. Thickness)

Question 37

Does this item include two pieces? The Hafele website indicates that the item is a set which suggests two plates. View answer

Asked 1 ´month ago | Kessebohmer Wastebin Pullout Wide Door Bracket - SET

Question 38

any chance of getting these in 3-4 weeks? qty 4. OME-SW-30-RO513 OME-SW-30-RO513 OME-SW-30-RO513 OME-SW-30-RO513 Om View answer

Asked 1 ´year ago | Omega National 47" (1194mm)Slat Length x 36" (914mm) Solid Wood Flat Tambour - EACH (Red Oak)

Question 39

2 per set, correct? thanks View answer

Asked 2 ´months ago | Expo Design Cable Brackets - For 3/8"-1/2" Thick Glass - Pair (Aluminum)

Question 40

Do you have 3” wide View answer

Asked 7 ´months ago | Designs of Distinction Finishing Touches 1-1/4" (32mm) x 3/32" (2mm) x 72" (1829mm) Decorative Aluminum Strapping

Question 41

what does the underside look like? View answer

Asked 24 ´days ago | Woodfold 36" (914mm)Slat Length x 24" (610mm) Solid Wood Flat Tambour w/Radius Edges - EACH (Red Oak)

Question 42

can it be re-keyed? View answer

Asked 1 ´month ago | Unison INOX Manhattan Stainless Steel Tubular Entry Handle Set

Question 43

Will this work with a 6” door weighing about 4 lbs? View answer

Asked 9 ´months ago | Sugatsune NSDX-20 Lapcon Adjustable Soft-Down Lid Stay - PAIR (Bright Nickel)

Question 44

you show walnut as a choice, but only list red oak, alder and cherry when you order View answer

Asked 9 ´months ago | Designs of Distinction Danish Modern Bun Foot - Red Oak

Question 45

I want matte black but checkout States satin View answer

Asked 1 ´month ago | Expo Design "The Shelf Clip" Shelf Brackets - For 3/8" to 1/2" Thick Glass/Shelf - PAIR

Question 46

Is this lock set rated for outdoor use View answer

Asked 1 ´month ago | Emtek Cast Bronze Petal Keyed Entry Door Knobset w/ Scalloped Rosette

Question 47

Does Sugatsune 316 Stainless Steel 4" (102mm) Center-to-Center Wire Cabinet Pull (Satin) come w mounting screws View answer

Asked 8 ´months ago | Sugatsune 316 Stainless Steel 4" (102mm) Center-to-Center Wire Cabinet Pull (Satin)

Question 48

What is the wall thickness or inside diameter for the brass tube that will fit this flange? View answer

Asked 1 ´month ago | Adjustable Wall Flange for 1-1/2" Diameter Tubing (Unlacquered Polished Brass)

Question 49

HELLO I NEED A TAMBOUR IN PAINT GRADE THATS ENOUGH TO GET 32" TALL BY 84" LONG IS THAT SOMETHING THAT YOU HAVE? View answer

Asked 8 ´months ago | Omega National 47" (1194mm)Slat Length x 24" (610mm) Solid Wood Flat Tambour - EACH (Hickory)

Question 50

What is the weight capacity of Sugatsune NSDX-35 Lapcon Adjustable Soft-Down Lid Stay - PAIR (Bright Nickel)? View answer

Asked 9 ´months ago | Sugatsune NSDX-35 Lapcon Adjustable Soft-Down Lid Stay - PAIR (Bright Nickel)

Browse by Topic

Tools