Is the Rev-A-Shelf 4WCT 3 cutlery tray insert plywood? View answer
Asked 1 ´year ago | Rev-A-Shelf 20.63" W Wood Cutlery Tray Insert, 2-7/8" Depth (Maple)
Can you cut the door shoe? Mine door is 32". Also, I have 3/8" clearance that is the minimum. Is that OK? View answers
Asked 2 ´years ago | Pemko 1-1/8" (29mm)H x 36" (914mm)L Door Shoe w/Vinyl Insert - EACH (Mill Finish Aluminum)
Is this the silicone coated pad? Silver color and makes fabric and iron glide over surface View answer
Asked 2 ´years ago | Iron A Way Replacement Ironing Board Cover and Pad
What is the diameter of the pin? View answer
Asked 2 ´years ago | Deltana Solid Brass 2" (51mm) x 2" (51mm) Flush/Full Inset Non-Self Closing Ball Tip Cabinet Hinge - EACH (Unlacquered Brass)
So this will wok on a 12 x 43 board? View answer
Sliding Closet Door Keyed Lock, does the raised edge on the back of the lock interfere/scratch the opposite door? View answer
Asked 2 ´years ago | CLOSEOUT SPECIAL! - KV/Sterling Sliding Closet Door Keyed Lock - Keyed Different - EACH (Bright Brass)
We used a Sugastune J95-24/16T hinge on a cabinet. Is there a Sugastune hinge that we can replace that opens farthe View answer
Asked 2 ´years ago | Sugatsune 95° Heavy-Duty Concealed Hinge - EACH (25mm Overlay, Free-Swinging, Screw-On)
How wide is the 46 inch cover View answer
1) exterior application ? 2) connecting rail track connector piece available to connect 2 railings ? thank you. View answer
Asked 2 ´years ago | US Futaba 78" (1981mm) Flat Rail Sliding Barn Door Track Set - Top Door Mounted - 300lb. (Matte Black)
Will the oval closet rod bend without a center bracket at 4'? View answer
Asked 1 ´year ago | US Futaba 96" (2438mm) Oval Closet Rod - EACH (Satin Brass)
What is the warranty on this item KVM-8405B20 View answer
Asked 2 ´years ago | Knape and Vogt 20" (508mm) 100lbs. (45.359kg) Medium-Duty Full Extension Box/File Drawer Slides - PAIR
what does single type mean? Doesn't it come as a set of 2 slides per door? View answer
Asked 2 ´years ago | Sugatsune IF Inset Receding Door Mechanism - Single Type - 19" Slide
Is Satin Nickel non corrosive? Do you have something with a 3/4” offset in stainless steel? View answer
Asked 2 ´years ago | 3/4in. Offset Face Frame Mount Non-Self Closing Cabinet Hinge - PAIR (Satin Nickel)
Can you confirm the hole spread on this Knape and Vogt sheave? I'm looking for a center-to-center spread of 1 7/8". View answer
Asked 1 ´year ago | CLOSEOUT SPECIAL! - Knape and Vogt Ball Bearing Door Sheave - EACH (Steel)
Do the series satin brass look the same in color as satin brass in other series? View answer
Asked 1 ´year ago | Emtek Timeless Classics 3-1/2" (89mm) Center-to-Center Westridge Cabinet Pull (Satin Brass)
Am I able to get 3 of these keyed alike? View answers
Asked 2 ´years ago | CLOSEOUT SPECIAL! - National 1-1/8" Pin Tumbler Sliding Door Plunger Lock - Keyed Different (Dull Chrome)
Would this be sturdy enough for a dresser drawer? Thanks View answer
Asked 2 ´years ago | CLOSEOUT SPECIAL! - US Futaba 16-3/4" (425mm) Center Mount Drawer Slide - (Each)
Do these hinges come in pairs? View answer
Asked 2 ´years ago | Deltana Solid Brass 3" (76mm) x 2" (51mm) Flush/Full Inset Non-Self Closing Ball Tip Cabinet Hinge - EACH (Antique Nickel)
Can the nylon cap be mounted on the hinge side(s) if used on double exterior steel doors ? View answers
Asked 2 ´years ago | Pemko 36" (914mm) L Residential Automatic Door Bottom - EACH (Clear Anodized Aluminum)
What is the load rating of this wheel? View answers
Asked 2 ´years ago | Abbey Gatepro 11" (279mm) Medium Duty Spring Loaded Gate Wheel - EACH (Zinc)
can I cut this down to fit an 80 inch passage way? View answer
Asked 2 ´years ago | NGP 96" (2438mm) Four-Door Bi-Fold Track Set - 75lb. (Aluminum)
Do you have a 5" on center same style pull View answer
Asked 1 ´year ago | Schwinn Originals 2Z348/96 3-3/4" (96mm) Center-to-Center Cabinet Pull (Polished Chrome)
Might it be possible to buy a dozen strike pieces (part View answer
Asked 2 ´years ago | Sugatsune Non-Magnetic Touch Latch - EACH (White)
Does this come in a 5.5 inch length? View answer
Asked 2 ´years ago | Epco Stainless Steel 3-1/2" (89mm) Center-to-Center Cabinet Bar Pull - 6" (152mm) Overall Length (Brushed Stainless Steel)
Do these come in a bulk package? View answer
Asked 1 ´year ago | Amerock Basics 3-1/4" (83mm) Center-to-Center Cabinet Pull
What size bolt should be used to install the Hager door stop? View answer
Asked 1 ´year ago | Hager 3-13/16" (97mm) Door Stop and Holder (Satin Chrome)
does this replace the salice 2xF 3 hinge View answer
Asked 2 ´years ago | Salice 165° Hinge - EACH (Full Overlay, Free-Swinging, Doweled)
Would this be 38” once installed? And extended? View answer
Asked 1 ´year ago | Peter Meier 615 Hamburg 34-1/4" Counter Height Table Legs with Adjustable Foot, Black Glossy - (Set of 4)
Asked 1 ´year ago | Amerock 3/8" Offset Surface Mount Non-Self Closing H-Style Cabinet Hinge - PAIR
Hole to Hole Spacing View answer
What are the dimensions of the accuride bottom mount drawer slides, both with and without brackets extended? View answer
Asked 1 ´year ago | Rev-A-Shelf 18in.(457mm) Accuride Bottom Mount Slides for Custom Shelving - PAIR
where is this pull manufactured? View answer
Asked 1 ´year ago | Schaub and Company Cabriole 3-3/4" (96mm) Center-to-Center Cabinet Pull (Polished Nickel)
is this heavy duty enough for a standard sized front door? View answer
Asked 2 ´years ago | Deltana Heavy Duty Adjustable Roller Catch - (Brushed Chrome)
what is the projection (in inches) from the cabinet once installed? View answer
Asked 2 ´years ago | Amerock Concentric 7-9/16" (192mm) Center-to-Center Cabinet Pull (Golden Champagne)
Can use this Handel for exterior door? View answer
Asked 2 ´years ago | Emtek Modern Spencer Door Leverset w/Modern Rectangle Rosette (Privacy - Polished Nickel - Right - 2-3/4in. Backset)
Is there a dummy handle available? View answer
can someone please let me know, where I can find the 2 3/4" backset latch? View answer
How long can this be vertically? Can it be longer? View answer
Asked 2 ´years ago | Whitehall Modern Vertical Address Plaque - (White/Black)
how is the tubing and fittings held together View answer
Asked 1 ´year ago | Ball Tee Fitting for 1-1/2" Diameter Tubing (Unlacquered Polished Brass)
Can it be used as a shelf pin jig? View answer
Asked 2 ´years ago | True Position Drill Guide Jig w/Case - Template for Cabinet Drawers and Doors, Long Hardware & 32mm Shelf Holes - EACH
Is the size of the number for 4 numbers bigger than 5 numbers? View answer
Does this come with the blow molded case pictured in the item photos? View answer
Can I get multiple locks keyed the same? View answer
Asked 2 ´years ago | Schlage B-Series Maximum Security Single Cylinder Grade 1 Deadbolt
Can the distance between the posts be adjusted? View answer
Asked 2 ´years ago | Hardware International Renaissance 3" (76mm) Center-to-Center Solid Brass Cabinet Pull
What is the height of this product? View answer
Asked 2 ´years ago | Emtek Modern Solid Brass Mortise Pocket Door Dummy Set
What Power Factor (LF) do I need to get for my chests top cabinet door View answer
Asked 1 ´year ago | Grass Kinvaro T-Slim Lift-Up Flap Fitting for Wooden Fronts, Inset Mount, 250-550 LF - SET (Stone)
what is the spread of the holes on the A875-UB? View answer
Asked 2 ´years ago | Atlas Homewares Victoria 3-3/4" (96mm) Center-to-Center Pull (Polished Chrome)
What if I need the handle in the other direction? View answer
Asked 2 ´years ago | Schlage Addison Collection Flair Lever Set (Storeroom - Satin Brass - Adjustable Backset)
Will this work with a Schlage Addison exterior door handle? View answer
