Question 1

Do you carry the Emtek Heavy Duty rounded barrell hinge 4" x 4" View answer

Asked 2 ´years ago | Emtek Solid Brass 4" x 4" Heavy-Duty, Square Barrel Hinge - 0.125" Thickness - PAIR (Oil Rubbed Bronze)

Question 2

Acorn Rough Iron 6-3/4" (171mm) Bean Door Pull - (Black) View answer

Asked 2 ´years ago | Acorn Rough Iron 6-3/4" (171mm) Bean Door Pull - (Black)

Question 3

What size screws come with this hinge? View answer

Asked 1 ´year ago | Deltana Solid Brass 3-1/2" x 3-1/2" Hinge - Square Corner

Question 4

Can I use this for 14" wide cabinet doors? View answer

Asked 2 ´years ago | Sugatsune 16" (406mm) Pocket Door System w/Soft-Close, for Inset Doors (M-Type)

Question 5

I need to order 8 sets of the different locks for a total of 16. Can you help me with this? View answer

Asked 1 ´year ago | Olympus Cascade 1-7/16" Disc Tumbler Cam Lock with Keyed Options (Nickel)

Question 6

What is the height of the assembled rack? And can the rack be adjusted to accommodate smaller plates (saucers etc)? View answer

Asked 1 ´year ago | Omega National 36in. Plate Display Rack - PAIR (Unlacquered Red Oak)

Question 7

do you have corner and end posts? View answer

Asked 2 ´years ago | Designs of Distinction Finishing Touches Gallery Rail Center Post - Polished Brass

Question 8

The product says sold in PAIRS. Is that two sets or is the male and female piece together known as a pair? View answer

Asked 2 ´years ago | CLOSEOUT SPECIAL! - Striplox™ Pro 23 Rapid Assembly Connector - PAIR (Black)

Question 9

Will the oval closet rod bend without a center bracket at 4'? View answer

Asked 1 ´year ago | US Futaba 96" (2438mm) Oval Closet Rod - EACH (Satin Brass)

Question 10

About PEM-P210AV32. My door is 32" wide, 1 3/4" thick. Will this work on my door if the Pemko is only 1 1/4" thick? View answer

Asked 2 ´years ago | Pemko 32" (813mm)L Door Shoe & Rain Drip - EACH (Mill Finish Aluminum)

Question 11

Does this fit the f60 handleset View answer

Asked 2 ´years ago | Schlage F-Series Spring Latch, Adjustable Backset Triple-Option Mortise and Drive-In - EACH (Oil Rubbed Bronze)

Question 12

Are these weatherproof and a rustproof product you can use outside? View answer

Asked 1 ´year ago | Sugatsune 304 Stainless Steel 1-5/16" (33mm) Key Hook (Polished)

Question 13

detailed drawing of how to replace dead bolt View answer

Asked 1 ´year ago | Omnia Prodigy Colonial Auxiliary Deabolt - Solid Brass

Question 14

I need to confirm the "U" measurement opening. It will be used to hang a pole and need to make sure it will fit. View answer

Asked 1 ´year ago | Sugatsune 304 Stainless Steel 2-3/16" (56mm) Utility Hook (Satin Stainless)

Question 15

Can you confirm the hole spread on this Knape and Vogt sheave? I'm looking for a center-to-center spread of 1 7/8". View answer

Asked 1 ´year ago | CLOSEOUT SPECIAL! - Knape and Vogt Ball Bearing Door Sheave - EACH (Steel)

Question 16

will this work with Schlage F40-BRW-GRW Broadway Privacy Door Lever Set - Bronze? View answers

Asked 2 ´years ago | Dexter Spring Latch, Adjustable Backset Dual-Option Mortise and Drive-In - EACH (Aged Bronze/Black)

Question 17

Height of the pull View answer

Asked 1 ´year ago | Schaub and Company Atherton 3" (76mm) Center-to-Center Plain Surface Knurled Edge Cup/Bin Pull (Satin Brass)

Question 18

IS there a kit similar to this for 5/16" glass? View answer

Asked 1 ´year ago | CLOSEOUT SPECIAL! - KV 60" (1524mm) Roll-Ezy Aluminum Track Set - For 1/4" Thick Small to Med. Glass Sliding Doors

Question 19

Do the series satin brass look the same in color as satin brass in other series? View answer

Asked 1 ´year ago | Emtek Timeless Classics 3-1/2" (89mm) Center-to-Center Westridge Cabinet Pull (Satin Brass)

Question 20

do you ship to canada View answer

Asked 1 ´year ago | CLOSEOUT SPECIAL! - Compx National Warded Barrel Key Blank - EACH

Question 21

Are these soft close? View answer

Asked 2 ´years ago | Repon 32" (813mm) 200lbs. (90.718kg) Heavy-Duty Full Extension Box/File Drawer Slides - PAIR

Question 22

Can I get the measurements of the top of the wood foot? I am adding it to another View answer

Asked 2 ´years ago | Designs of Distinction 4" (102mm)H Madeline Small Abbe Bun Foot

Question 23

My drawer is 11" but distance from front to back in the cabinet is 14" Will a 12" slide work? View answer

Asked 1 ´year ago | Knape and Vogt GS4270 12" (305mm) 100lbs. (45.359kg) Soft-Closing Drawer Slides - PAIR

Question 24

Can this hardware be used for a bifold garage door? View answer

Asked 2 ´years ago | NGP 96" (2438mm) Four-Door Bi-Fold Track Set - 75lb. (Aluminum)

Question 25

return policy View answer

Asked 1 ´year ago | Emtek Solid Brass 6" (152mm) Scalloped Flush Pull - EACH

Question 26

What is the diameter of the projection on the bottom that fits into the chrome holder? View answer

Asked 2 ´years ago | Smedbo Ice Glass Soap Dish Replacement (Polished Chrome/Frosted Glass)

Question 27

Does this come with mounting hardware and sidewalls? View answer

Asked 2 ´years ago | Woodfold 36" (914mm)Slat Length x 24" (610mm) Solid Wood Flat Tambour w/Radius Edges - EACH (Maple)

Question 28

Can you cut the door shoe? Mine door is 32". Also, I have 3/8" clearance that is the minimum. Is that OK? View answers

Asked 2 ´years ago | Pemko 1-1/8" (29mm)H x 36" (914mm)L Door Shoe w/Vinyl Insert - EACH (Mill Finish Aluminum)

Question 29

What Power Factor (LF) do I need to get for my chests top cabinet door View answer

Asked 1 ´year ago | Grass Kinvaro T-Slim Lift-Up Flap Fitting for Wooden Fronts, Inset Mount, 250-550 LF - SET (Stone)

Question 30

crystal pull seated from brass base View answer

Asked 1 ´year ago | Cal Crystal 1-3/8" (35mm) Faceted Round Cabinet Knob (Clear Crystal/Satin Nickel)

Question 31

Do you have the appliance garage in any other colors? View answer

Asked 1 ´year ago | Omega National Appliance Garage - Corner Unit (Unlacquered Red Oak)

Question 32

What is the diameter of the pin? View answer

Asked 2 ´years ago | Deltana Solid Brass 2" (51mm) x 2" (51mm) Flush/Full Inset Non-Self Closing Ball Tip Cabinet Hinge - EACH (Unlacquered Brass)

Question 33

So this will wok on a 12 x 43 board? View answer

Asked 2 ´years ago | Iron A Way Replacement Ironing Board Cover and Pad

Question 34

Does the carrier include the pendant bolt and mounting plate? View answer

Asked 1 ´year ago | Grant 7000 Series Ball-Bearing Carrier - EACH (150lb.)

Question 35

Is the bar diameter 3/4 inch? View answer

Asked 1 ´year ago | Taymor Brentwood Collection 24" (610mm) Towel Bar (Polished Chrome)

Question 36

Is this pull suitable for a panel ready refrigerator? View answer

Asked 1 ´year ago | Schwinn Design 4135/192 7-9/16" (192mm) Center-to-Center Cabinet Pull (Satin Stainless Steel)

Question 37

Can I get the DoorSaver II commercial hinge pin door stop in stainless steel for an exterior door? View answer

Asked 1 ´year ago | DoorSaver II - Commercial Hinge Pin Door Stop

Question 38

We used a Sugastune J95-24/16T hinge on a cabinet. Is there a Sugastune hinge that we can replace that opens farthe View answer

Asked 2 ´years ago | Sugatsune 95° Heavy-Duty Concealed Hinge - EACH (25mm Overlay, Free-Swinging, Screw-On)

Question 39

How long are these? View answer

Asked 1 ´year ago | Salice Smove® Soft-Close Adapter for Universal Door Hinges - EACH (Nickel)

Question 40

How wide is the 46 inch cover View answer

Asked 2 ´years ago | Iron A Way Replacement Ironing Board Cover and Pad

Question 41

On the LDI-11-101 what is the diameter of the base plate? View answer

Asked 1 ´year ago | Lewis Dolin Square Bar 1-3/4" (44mm) Cabinet Knob

Question 42

1) exterior application ? 2) connecting rail track connector piece available to connect 2 railings ? thank you. View answer

Asked 2 ´years ago | US Futaba 78" (1981mm) Flat Rail Sliding Barn Door Track Set - Top Door Mounted - 300lb. (Matte Black)

Question 43

I need a 36” wide by 20” tall. How do i order that? I can’t seem to find it ? View answer

Asked 1 ´year ago | Omega National 36" (914mm) Face Frame Style Spring Tension Track System for Tambour - SET (Almond)

Question 44

What is the warranty on this item KVM-8405B20 View answer

Asked 2 ´years ago | Knape and Vogt 20" (508mm) 100lbs. (45.359kg) Medium-Duty Full Extension Box/File Drawer Slides - PAIR

Question 45

what does single type mean? Doesn't it come as a set of 2 slides per door? View answer

Asked 2 ´years ago | Sugatsune IF Inset Receding Door Mechanism - Single Type - 19" Slide

Question 46

Is Satin Nickel non corrosive? Do you have something with a 3/4” offset in stainless steel? View answer

Asked 2 ´years ago | 3/4in. Offset Face Frame Mount Non-Self Closing Cabinet Hinge - PAIR (Satin Nickel)

Question 47

can I use Handrail & Arm Rail Brackets BFD-870-20 on a round solid wood railing View answer

Asked 1 ´year ago | Hand Rail Bracket for 2" Diameter Tubing (Unlacquered Polished Brass)

Question 48

Are these 120v that can be used in a home? View answer

Asked 1 ´year ago | Buster & Punch Double Toggle Switch Without Logo (Brass)

Question 49

Am I able to get 3 of these keyed alike? View answers

Asked 2 ´years ago | CLOSEOUT SPECIAL! - National 1-1/8" Pin Tumbler Sliding Door Plunger Lock - Keyed Different (Dull Chrome)

Question 50

Would this be sturdy enough for a dresser drawer? Thanks View answer

Asked 2 ´years ago | CLOSEOUT SPECIAL! - US Futaba 16-3/4" (425mm) Center Mount Drawer Slide - (Each)

Browse by Topic

Tools