Description

Ball bearing carrier has free rolling balls on 3in. centers.
Unique design creates two point suspension between shoe and lower track.
Component For use with KV Roll-Ezy 1/4in. Ball-Bearing Track system.
NOTE: This item is oversized and will ship via LTL freight unless specified to be cut, we can cut down to size if requested.
Specify in the comments of cart if you would like it cut and at what increments.
Standard LTL freight will be approximately $800.
If cut to 94" or less, shipping charge will be approx. $30-50.
If cut to 95" to 108" shipping charge will be approx. $225-$250.
Track is non-returnable once cut. Please call if you have any questions.

Optional Accessories

KVM-993ZC144

^$74^.75

KVM-995ZC144

^$22^.93

KVM-999ZC144

^$114^.58

Manufacturer:: Knape and Vogt
Manufacturer Location:: USA
Color/Finish:: zinc
Material:: steel
Type:: door track component
Length:: 144"
Minimum Material Thickness:: 1/4"
Maximum Material Thickness:: 1/4"
California Residents:: WARNING: This product can expose you to chemicals including lead, nickel and/or chrome, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Additional:: Installation Notes & Recommendations: Knape and Vogt does not recommend butt-joints and/or openings longer than 12 feet. Knape and Vogt recommends that the height to width ratio for glass doors should not exceed 2:1. Glass is cut 1-1/4in. lower than height of opening.

Detailed Specifications

Knape and Vogt Roll-EZY Ball-Bearing Track

KV 48" (1219mm) Ball-Bearing Track Set For 1/4" Thick Large Glass Sliding Doors

Knape and Vogt 144" (3658mm) Door Shoe - For use with KV Roll-Ezy 1/4in. Ball-Bearing Track system - EACH (Zinc)

KV 36" (914mm) Ball-Bearing Track Set For 1/4" Thick Large Glass Sliding Doors

Knape and Vogt 144" (3658mm) Lower Channel - For use with KV Roll-Ezy 1/4in. Ball-Bearing Track system - EACH (Zinc)