- Knape and Vogt Lower Channel. Balls ride freely on curved anvil with no contact against side of lower track.
- Component for use with KV Roll-Ezy 1/4in. Ball-Bearing Track system.
- NOTE: This item is oversized and will ship via LTL freight unless specified to be cut, we can cut down to size if requested.
- Specify in the comments of cart if you would like it cut and at what increments.
- Standard LTL freight will be approximately $500.
- If cut to 94" or less, shipping charge will be approx. $30-50.
- If cut to 95" to 108" shipping charge will be approx. $210-$230.
- Track is non-returnable once cut. Please call if you have any questions.
- Knape and Vogt
- Manufacturer Location:
- door track channel
- Minimum Material Thickness:
- Maximum Material Thickness:
- California Residents:
- WARNING: This product can expose you to chemicals including lead, nickel and/or chrome, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Installation Notes & Recommendations: Knape and Vogt does not recommend butt-joints and/or openings longer than 12 feet. Knape and Vogt recommends that the height to width ratio for glass doors should not exceed 2:1. Glass is cut 1-1/4in. lower than height of opening.
Installation / Specification Documents
Shop the series
Knape and Vogt Roll-EZY Ball-Bearing TrackView Product Collection
Knape and Vogt 144" Lower Channel - For use with KV Roll-Ezy 1/4in. Ball-Bearing Track system - EACH (Zinc)
KV 72" Ball-Bearing Track Set For 1/4" Thick Large Glass Sliding Doors
Knape and Vogt 144" Ball Bearing Carrier - For use with KV Roll-Ezy 1/4in. Ball-Bearing Track system - EACH (Zinc)
KV 48" Ball-Bearing Track Set For 1/4" Thick Large Glass Sliding Doors