Description
M.L. Campbell's Level Sealer is a HAPS Free high solids, water white formula specifically designed for interior wood surfaces that are exposed to moisture, heat and household chemicals. It was also designed so that you can build the dry mils past the normal 5 mils maximum recommendation. So, if you want to have a full fill or thick build look and you do not want to go to polyurethane, Level Sealer is for you. It gives good sag resistance and can be sprayed from 4-10 wet mils on a vertical surface. It can also be built with multiple thin coats to get 10-12 dry mils by allowing each coat to dry thoroughly.
Performance:
Performance:
- High solids and build
- Excellent moisture and heat resistance
Specifications
- Manufacturer:
-
M.L. Campbell
- Manufacturer Location:
-
USA
- Type:
-
Sealer
- Warranty:
-
Limited warranty.
- Category:
-
Coatings
- Vehicle:
-
Solvent Borne
- Application:
-
Interior
- Technology:
-
Post-Cat Lacquer
- % Solids by Volume:
-
37 ± 2
- % Solids by Weight:
-
45 ± 2
- Color:
-
0 - 2 GH Hazy
- Drying Times (77°F or 25°C):
-
Dry to Touch: 30-60 minutes, Sanding Dry: 1 Hour, Stacking Dry: 5-8 Hours
- Flash Point (PMCC):
-
70°F
- Other Products:
-
For Catalyst use C1491 Care Catalyst. Stir sealer well before spraying. Level Sealer™ has a thixotropic viscosity and does not need to be reduced; viscosity will reduce with shear from spraying. If reduction is necessary, use M.L. Campbell Standard lac
- Packaged VOC:
-
525 g/l (4.38 lbs/gal.)
- VOC as applied (catalyzed at 10%):
-
541 g/l (4.51 lbs/gal.)
- California Residents:
-
WARNING: This product can expose you to chemicals including lead and/or wood dust, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Installation / Specification Documents
Return Policy
M.L. Campbell
View Brand Products