Description
M.L. Campbell's Standard Lacquer Thinner is a high-quality special blend of solvents specifically designed to be an excellent reducer for nitro-cellulose, pre-catalyzed, post catalyzed, butyrate and acrylic lacquers. It is tolerant of a wide range of poor application conditions, and will maintain good dry, flow, and blush resistance.
Standard Lacquer Thinner has a minimum tendency to raise the wood grain. This combination of properties minimizes the sanding required on lacquer sealer and between finish coats. Many finishing problems would not have occurred if a quality lacquer thinner had been used. No recycled solvents are used in the manufacturing of this product.
Performance:
Standard Lacquer Thinner has a minimum tendency to raise the wood grain. This combination of properties minimizes the sanding required on lacquer sealer and between finish coats. Many finishing problems would not have occurred if a quality lacquer thinner had been used. No recycled solvents are used in the manufacturing of this product.
Performance:
- Aids in application
- Blush resistant
- Helps maintain product flow
Specifications
- Manufacturer:
-
M.L. Campbell
- Manufacturer Location:
-
USA
- Type:
-
Lacquer Thinner
- Warranty:
-
Limited warranty.
- Category:
-
Solvents
- Vehicle:
-
Solvent Borne
- Application:
-
Interior
- Flash Point (PMCC):
-
53°F or 11.6°C
- Other Products:
-
When periods of excess humidity exist (over 50%) which can cause blushing (clouding of the finish), the use of up to 10% of Lacquer Retarder Thinner per gallon should be considered.
- Packaged VOC:
-
851 g/l (7.11 lbs./gallon)
- California Residents:
-
WARNING: This product can expose you to chemicals including lead and/or wood dust, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Installation / Specification Documents
Return Policy
M.L. Campbell
View Brand Products